How to Make a Producer Tag and Add It to Your Beats (2026)

How to make a producer tag: record your name or use text-to-speech, export a short file, then add it on BeatStars and Airbit so the store tags your previews. Steps from the official help pages.

ScheduleBeats TeamNovember 18, 20266 min read

How to Make a Producer Tag and Add It to Your Beats

Short answer: a producer tag is a short recording of your producer name that plays over a beat. To make one, record a few words (or generate them with text-to-speech), clean the recording in your DAW and export it as a short audio file. Then put it at the start of your beat, or upload it to your beat store so the store adds it to the preview for you. BeatStars can even create the tag from a text you type, with no microphone.

The platform steps below come from the BeatStars and Airbit help centers (checked on November 18, 2026).

Two kinds of tag, two jobs

  • The signature tag. It plays once, usually at the start, and it is part of the beat itself. Its job is your name: people hear who made the beat. It is in every copy of the file, YouTube video included.
  • The protection tag (voice tag). It repeats over the preview that people stream on your store. Airbit describes it as a personalized audio snippet used to watermark your beats against unauthorized use, most commonly the producer's name repeated every 20 to 30 seconds. The buyer gets the clean file after the purchase.

You can use the same recording for both.

How to make a producer tag in 4 steps

  • Choose the words. Your producer name, or a very short phrase with your name in it. Short and easy to say works best, because people will hear it many times.
  • Get the voice. Record yourself or a friend with a microphone or a phone in a quiet room. No microphone? In BeatStars Studio you can create a personalized voice tag from text: you type the words, pick a language and a voice, and listen to a preview.
  • Clean it in your DAW. Cut the silence before the first word, then add the effects you like (reverb, delay, pitch). Play it over one of your beats to set the volume. Airbit gives the same advice: experiment with the volume until it sounds reasonable mixed with your beats.
  • Export a short audio file. Airbit asks for an MP3. Keep the file in a folder you can find again: you will reuse it for every beat.

Add your tag on BeatStars

BeatStars calls it a Voice Tag. The help article applies to the Starter, Growth and Professional plans.

  • Open BeatStars Studio and go to Tracks.
  • Click Track Preferences, then open the Voice tags section.
  • Click New Voice Tag. Upload your file, or create a personalized voice tag with text-to-speech.
  • Click the three dots next to the tag and set it as your default.

After that, you do not need to upload a tagged file. BeatStars says that if you upload an untagged WAV and publish, the system generates the tagged preview and an untagged MP3 by itself.

Two things to know:

  • A new voice tag only applies to new uploads. For a beat that is already online, open its Edit page, go to Preview Track (Tagged), click the trash icon and click Publish Track: BeatStars builds a new tagged preview.
  • The Preview Track (Tagged) field is only for a full beat that already has the tag mixed in. If you put an untagged beat there, your preview plays with no tag at all.

File formats and sizes are in BeatStars upload requirements.

Add your tag on Airbit

Airbit calls it a voicetag, and its Autotag feature mixes it with your beat.

  • Go to Dashboard > Music & Media > Voicetag.
  • Drop your MP3 in the box. You can play it back or delete it.
  • New beats now get a tagged version automatically. For beats uploaded before the tag, run Autotag on them.

One detail changes how you export the file: Airbit loops the voicetag over the beat with no pause between loops. So leave about 20 to 30 seconds of silence before or after the words inside the MP3. Custom voicetags are for Platinum members. A free account is protected with the default Airbit tag.

BeatStars and Airbit side by side

QuestionBeatStarsAirbit
Name of the featureVoice TagVoicetag, mixed by Autotag
Where you set itStudio > Tracks > Track Preferences > Voice tagsDashboard > Music & Media > Voicetag
Make a tag without a microphoneYes, text-to-speech with a choice of language and voiceNot mentioned in the help article
Your own tagStarter, Growth and ProfessionalPlatinum members only
If you upload no tagThe default BeatStars voice tag is used. It cannot be removed, only replaced by yoursThe default Airbit tag is used
Beats already onlineRemove the tagged preview and publish again, or replace it by handRun Autotag on existing beats
Upload your own tagged versionOptional, in Preview Track (Tagged)MP3 only, Platinum members only

The plans and fees of both stores are compared in BeatStars vs Airbit.

And on YouTube?

YouTube does not add anything to your audio. A type beat video plays the file you uploaded, so a tag is heard on YouTube only if it is inside that file. That is why many producers put a signature tag at the intro of the beat. Remember that a tag mixed into the beat is also in the file your buyers receive. BeatStars notes that it is fairly common for producers to tag files for certain licenses, and that producers manage this themselves. Say it clearly in your license, see beat lease contract explained.

For the title and the tags of the video, the type beat title generator and the type beat tag generator are free and need no account. Careful with the word: those are YouTube keyword tags, not voice tags.

Checklist before you publish

  • ✅ The tag says your producer name clearly
  • ✅ The file starts on the first word, with no silence before it (except the silence Airbit asks for)
  • ✅ You played it over a beat and the volume sits well
  • ✅ It is set as the default voice tag in your store
  • ✅ The Preview Track (Tagged) field on BeatStars is empty, unless your file really contains the tag
  • ✅ Your license says whether the delivered files are tagged or not

Where ScheduleBeats fits

ScheduleBeats is a beat uploader for BeatStars and YouTube. It sends the same audio file to both and it does not add a tag: what you export is what people hear on YouTube. You add the audio and a cover once. It builds the YouTube video, fills in the title, description and tags from your templates, and releases the beat on BeatStars and on YouTube on the date you chose, with a YouTube Short. You can also send a beat right after the export with the FL Studio plugin. The Free plan covers 3 beats per week.

Try ScheduleBeats for free

FAQ

What is a producer tag?

A short recording, usually the producer's name, that plays over a beat. It tells listeners who made the beat, and when it repeats over a preview it protects the beat against unauthorized use.

Can I make a producer tag without a microphone?

Yes. BeatStars Studio creates a personalized voice tag from text: you enter the words, choose a language and a voice, and preview the result.

How do I add a voice tag on BeatStars?

In Studio, go to Tracks, click Track Preferences, open Voice tags and click New Voice Tag. Upload a file or use text-to-speech, then set the tag as default. It applies to new uploads.

Why can't I hear my voice tag on BeatStars?

BeatStars gives a common cause: an untagged file was uploaded in the Preview Track (Tagged) field, and it replaces the automatic tagged preview. Remove that file and publish the track again.

Do buyers get the beat with the tag?

The store tag is added to the streaming preview. What the buyer receives depends on your license and on the file you uploaded. If you mixed a tag into the beat, it is in the delivered file too.

How long should the tag file be for Airbit?

Airbit loops the voicetag with no pause, so it advises about 20 to 30 seconds of silence before or after the words, in an MP3 file.

how to make a producer tagproducer tagvoice tagbeatstars voice tagbeat tag
Share this article:

Ready to Automate Your Uploads?

Stop spending hours uploading beats manually. Schedule once, publish automatically.

Get Started Free